Influence of the bed joint thickness on the bearing capacity of the brick masonry under compression loading: an ultrasound assessment

Authors

  • Silvia M. Monteagudo Universidad Politécnica de Madrid (Spain), Escuela Técnica Superior de Caminos, Canales y Puertos, Departamento de Ingeniería Civil.
  • María Jesus Casat Universidad Politécnica de Madrid (Spain), Escuela Universitaria de Ingeniería Técnica Aeronautica, Departmento de Vehículos Aeroespaciales.
  • Jaime C. Gálvez Universidad Politécnica de Madrid (Spain), Escuela Técnica Superior de Caminos, Canales y Puertos, Departamento de Ingeniería Civil.

Keywords:

Non-destructive tests, ultrasound, brick masonry, compression stress, bed joint

Abstract

The aim of this paper is to analyse the influence of mortar bed joint thickness on the structural behaviour of brick-masonry specimens under compressive stress. Moreover, the progressive cracking of the material was studied during the loading process. Nine walls and nine columns were tested, combining three mortar bed joint thicknesses. Simultaneously, ultrasound, extensometer and Schmidt hammer measurements were recorded. The obtained results show that the thinner the mortar bed joint (5mm), the greater the breaking load (20.5N/mm2) and ultrasonic pulse speed. In addition, ultrasound evaluation shows good agreement with the extensometer measurements and allows accurate detection of the inner material failure.

Downloads

Download data is not yet available.

Downloads

Published

2015-04-30

How to Cite

Monteagudo, S. M., Casat, M. J., & Gálvez, J. C. (2015). Influence of the bed joint thickness on the bearing capacity of the brick masonry under compression loading: an ultrasound assessment. Revista De La Construcción. Journal of Construction, 14(1), 9–15. Retrieved from https://revistadisena.uc.cl/index.php/RDLC/article/view/13256