Performance evaluation of mercerized raffia and sisal fibers in engineered cementitious composites
DOI:
https://doi.org/10.7764/RDLC.24.2.319Keywords:
Mercerization, engineered cementitious composite, mono and hybrid fibers, characterization, mechanical and structural properties.Abstract
This study investigated the use of raffia and sisal fibers as replacements for coarse aggregates in engineered cementitious composite (ECC) to improve its flexural properties. The fibers were treated with mercerization, a common chemical process, to alter their structure and surface morphology. The fiber characteristics were analyzed using various techniques, including Field Emission Scanning Electron Microscope (FESEM), Fourier Transformation Infrared (FTIR), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimeter (DSC), and tensile test. The mechanical properties (compression, elastic modulus, direct tensile, and flexural strength) of treated and untreated mono and hybrid fiber combinations were evaluated based on their volume content in the ECC mix. The results showed that mercerized hybrid fiber combinations exhibited enhanced mechanical performance compared to untreated fibers. The ECC was then applied in the tension zone of an M30 grade structural beam to determine its load-carrying performance in this zone. Overall, the use of ECC with mercerized hybrid fibers has the potential to significantly improve the mechanical properties of concrete structures.
Downloads
References
Abdullah, Che Ibrahim, Ahmad Danial Azzahari, Nor Mas Mira Abd. Rahman, Aziz Hassan, and Rosiyah Yahya. (2019). Optimizing Treatment of Oil Palm-Empty Fruit Bunch (OP-EFB) Fiber: Chemical, Thermal and Physical Properties of Alkalized Fibers. Fibers and Polymers 20(3):527–37. https://doi.org/10.1007/s12221-019-8492-0
Ahmed, S. F. U., and M. Maalej. (2009). Tensile Strain Hardening Behaviour of Hybrid Steel-Polyethylene Fibre Reinforced Cementitious Composites. Construction and Building Materials 23(1):96–106. https://doi.org/10.1016/j.conbuildmat.2008.01.009
Anon. (2002). Advances in ECC Research. in SP-206: Concrete: Material Science to Application - A Tribute to Surendra P. Shah. Ed. P. Balaguru, A. Naaman, and W. WiessAmerican Concrete Institute.
Krishnaraja, A. R., Kandasamy, S., Kowsalya, M. (2018). Influence of Polymeric and Non-polymeric fibers in Hybrid Engineered Cementitious Composites. Romanian Journal of Materials 48(4):507–13.
ASTM, C. (2012). 1609/c 1609m Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading). Replaces ASTM C1609/C1609M-12. ASTM international.
ASTM, D. (2008). 3039. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. D3039/D3039M-17. ASTM international.
ASTM, (2014). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. C39/C39M-24. ASTM international.
Aswin, Muhammad, Yasin Onuralp Özkılıç, Ceyhun Aksoylu, and Amin Al-Fakih. (2024). Evaluating Bulky PVA-ECC Mortar Developed with River Sand, Silica Fume, and High-Volume Fly Ash: A Focus on Short- and Long-Term Compressive Strength. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-023-08653-4
Bahraq, Ashraf A., Mohammed Maslehuddin, and Salah U. Al-Dulaijan. (2020). Macro- and Micro-Properties of Engineered Cementitious Composites (ECCs) Incorporating Industrial Waste Materials: A Review. Arabian Journal for Science and Engineering 45(10):7869–95. https://doi.org/10.1007/s13369-020-04729-7
Belouadah, Z., A. Ati, and M. Rokbi. (2015). Characterization of New Natural Cellulosic Fiber from Lygeum Spartum L. Carbohydrate Polymers 134:429–37. https://doi.org/10.1016/j.carbpol.2015.08.024
BIS, (1988). Determination of Compressive Strength of Hydraulic Cement., IS 4031 – Part 6. Bureau of Indian Standards, New Delhi, India.
BIS, (2019). Design and Development of Different Types of Concrete Mixes, IS 10262, Bureau of Indian Standards, New Delhi, India.
Castoldi, Raylane de Souza, Lourdes Maria Silva de Souza, Felipe Souto, Marco Liebscher, Viktor Mechtcherine, and Flávio de Andrade Silva. (2022). Effect of Alkali Treatment on Physical–Chemical Properties of Sisal Fibers and Adhesion towards Cement-Based Matrices. Construction and Building Materials 345:128363. https://doi.org/10.1016/j.conbuildmat.2022.128363
Cheung, Hoi-yan, Mei-po Ho, Kin-tak Lau, Francisco Cardona, and David Hui. (2009). Natural Fibre-Reinforced Composites for Bioengineering and Environmental Engineering Applications. Composites Part B: Engineering 40(7):655–63. https://doi.org/10.1016/j.compositesb.2009.04.014
Deng, Qi, Rongli Zhang, Chun Liu, Zhenhua Duan, and Jianzhuang Xiao. (2023). Influence of Fiber Properties on Abrasion Resistance of Recycled Aggregates Concrete: Length, Volume Fraction, and Types of Fibers. Construction and Building Materials 362:129750. https://doi.org/10.1016/j.conbuildmat.2022.129750
Fan, M, and F Fu. (2017). 1 - Introduction: A Perspective – Natural Fibre Composites in Construction. Pp. 1–20 in Advanced High Strength Natural Fibre Composites in Construction, edited by Mizi Fan and Feng Fu. Woodhead Publishing. https://doi.org/10.1016/B978-0-08-100411-1.00001-7
Garcia, G., Cabrera, R., Rolón, J., Pichardo, R., & Thomas, C. (2024). Natural fibers as reinforcement of mortar and concrete: A systematic review from Central and South American regions. Journal of Building Engineering, 98, 111267. https://doi.org/10.1016/j.jobe.2024.111267
Huang, Bo-Tao, Ke-Fan Weng, Ji-Xiang Zhu, Yu Xiang, Jian-Guo Dai, and Victor C. Li. (2021). Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) with an Ultra-High Compressive Strength over 210 MPa. Composites Communications 26:100775. https://doi.org/10.1016/j.coco.2021.100775
Humur, Ghassan Hussein, and Abdulkadir Çevik. (2023). Magnesium Sulfate Resistance of Strain-Hardening Fiber Reinforced Slag and Fly Ash-Based Engineered Geopolymer Composites. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-023-08480-7
Ibrahim, Saher Fawzy, E. S. El-Amoudy, and K. E. Shady. (2011). Thermal Analysis and Characterization of Some Cellulosic Fabrics Dyed by a New Natural Dye and Mordanted with Different Mordants. International Journal of Chemistry 3(2):40.
Ike-Eze, I. C. Ezema, V. S. Aigbodion, S. N. Ude, A. D. Omah, and P. O. Offor. (2019). Experimental Study on the Effects of Surface Treatment Reagents on Tensile Properties of Banana Fiber Reinforced Polyester Composites. Journal of Materials and Environmental Science J 10(5):402–10.
Jaramillo-Quiceno, Natalia, J. Manuel Vélez R., Edith M. Cadena Ch., Adriana Restrepo-Osorio, and J. Felipe Santa. (2018). Improvement of Mechanical Properties of Pineapple Leaf Fibers by Mercerization Process. Fibers and Polymers 19(12):2604–11. https://doi.org/10.1007/s12221-018-8522-3
Jebadurai, S. Garette, R. Edwin Raj, V. S. Sreenivasan, and J. S. Binoj. (2019). Comprehensive Characterization of Natural Cellulosic Fiber from Coccinia Grandis Stem. Carbohydrate Polymers 207:675–83. https://doi.org/10.1016/j.carbpol.2018.12.027
Joshi, Satish v, L. T. Drzal, A. K. Mohanty, and S. Arora. (2004). Are Natural Fiber Composites Environmentally Superior to Glass Fiber Reinforced Composites? Composites Part A: Applied Science and Manufacturing 35(3):371–76. https://doi.org/10.1016/j.compositesa.2003.09.016
Kabir, M. M., Hao Wang, K. T. Lau, and Francisco Cardona. (2012). Chemical Treatments on Plant-Based Natural Fibre Reinforced Polymer Composites: An Overview. Composites Part B: Engineering 43(7):2883–92. https://doi.org/10.1016/j.compositesb.2012.04.053
Kotsovos, M. D. (1984). Concrete. A Brittle Fracturing Material. Matériaux et Constructions 17(2):107–15. https://doi.org/10.1007/BF02473662
Krishnamoorthy, M., D. Tensing, M. Sivaraja, and A. R. Krishnaraja. (2017). Durability Studies on Polyethylene Terephthalate (PET) Fibre Reinforced Concrete. International Journal of Civil Engineering and Technology 8(10):634–40.
Krishnaraja, Ammapalayam Ramasamy, and Shanmughasundaram Kandasamy. (2018). Flexural Performance of Hybrid Engineered Cementitious Composite Layered Reinforced Concrete Beams. Periodica Polytechnica Civil Engineering 62(4):921–29. https://doi.org/10.3311/PPci.11748
Li, V. C. (2003). On Engineered cementitious composites (ECC). Journal of Advanced Concrete Technology, 1(3), 215–230. https://doi.org/10.3151/jact.1.215
Li, Victor C. (2008). “Engineered Cementitious Composites (ECC) – Material, Structural, and Durability Performance,” in Concrete Construction Engineering Handbook, Chapter 24, Ed. E. Nawy, CRC Press.
Maache, Mabrouk, Abderrezak Bezazi, Salah Amroune, Fabrizio Scarpa, and Alain Dufresne. (2017). Characterization of a Novel Natural Cellulosic Fiber from Juncus Effusus L. Carbohydrate Polymers 171:163–72. https://doi.org/10.1016/j.carbpol.2017.04.096
Manna, S., Prosenjit S., Sukanya C., Sabu, T., Sharma, V, (2017). Alkali Treatment to Improve Physical, Mechanical and Chemical Properties of Ligno-cellulosic Natural Fibers for Use in Various Applications. Lignocellulosic Biomass Production and Industrial Applications 47–63.
Magdalene, P. S., & Karthikeyan, B. (2024). Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure. Revista de la construcción, 23(1), 104-128. http://dx.doi.org/10.7764/rdlc.23.1.104
Manzato, Lizandro, Mitsuo Lopes Takeno, Wanison André Gil Pessoa-Junior, Luis André Morais Mariuba, and John Simonsen. (2018). Optimization of Cellulose Extraction from Jute Fiber by Box-Behnken Design. Fibers and Polymers 19(2):289–96. https://doi.org/10.1007/s12221-018-1123-8
Muthalagu, R., V. Srinivasan, S. Sathees Kumar, and V. Murali Krishna. (2021). Extraction and Effects of Mechanical Characterization and Thermal Attributes of Jute, Prosopis Juliflora Bark, and Kenaf Fibers Reinforced Bio Composites Used for Engineering Applications. Fibers and Polymers 22(7):2018–26. https://doi.org/10.1007/s12221-018-1123-8
Nagappan, Saravanan, Sampath Pavayee Subramani, Sathish Kumar Palaniappan, and Bhuvaneshwaran Mylsamy. (2022). Impact of Alkali Treatment and Fiber Length on Mechanical Properties of New Agro Waste Lagenaria Siceraria Fiber Reinforced Epoxy Composites. Journal of Natural Fibers 19(13):6853–64. https://doi.org/10.1080/15440478.2021.1932681
Okano, T., and A. Sarko. (1985). Mercerization of Cellulose. II. Alkali–Cellulose Intermediates and a Possible Mercerization Mechanism. Journal of Applied Polymer Science 30(1):325–32. https://doi.org/10.1002/app.1985.070300128
Pan, Zuanfeng, Chang Wu, Jianzhong Liu, Wei Wang, and Jiwei Liu. (2015). Study on Mechanical Properties of Cost-Effective Polyvinyl Alcohol Engineered Cementitious Composites (PVA-ECC). Construction and Building Materials 78:397–404. https://doi.org/10.1016/j.conbuildmat.2014.12.071
Patel, Umakanta, Rashmi Ray, Abhipreet Mohapatra, Sankar Narayan Das, and Harish Chandra Das. (2022). Effect of Different Chemical Treatments on Surface Morphology, Thermal, and Tensile Strength of Bauhinia Vahlii (BV) Stem Fibers. Journal of Natural Fibers 19(1):280–91. https://doi.org/10.1080/15440478.2020.1739591
Pickering, Kim L., M. G. Aruan Efendy, and Tan Minh Le. (2016). A Review of Recent Developments in Natural Fibre Composites and Their Mechanical Performance. Composites Part A: Applied Science and Manufacturing 83:98–112. https://doi.org/10.1016/j.compositesa.2015.08.038
Qudah, Salahuddin, and Mohamed Maalej. (2014). Application of Engineered Cementitious Composites (ECC) in Interior Beam–Column Connections for Enhanced Seismic Resistance. Engineering Structures 69:235–45. https://doi.org/10.1016/j.engstruct.2014.03.026
Rajeshkumar, G., V. Hariharan, and T. Scalici. (2016). Effect of NaOH Treatment on Properties of Phoenix Sp. Fiber. Journal of Natural Fibers 13(6):702–13. http:dx.doi.org/10.1080/15540478.2015.1130005
Rokbi, Mansour, Hocine Osmani, Abdellatif Imad, and Noureddine Benseddiq. (2011). Effect of Chemical Treatment on Flexure Properties of Natural Fiber-Reinforced Polyester Composite. Procedia Engineering 10:2092–97. https://doi.org/10.1016/j.proeng.2011.04.346
Saxena, M., Pappu, A., Haque, R., & Sharma, A. (2011). SISal Fiber-based Polymer Composites and their applications. In Springer eBooks (pp. 589–659). https://doi.org/10.1007/978-3-642-17370-7_22
Sgriccia, N., M. C. Hawley, and M. Misra. (2008). Characterization of Natural Fiber Surfaces and Natural Fiber Composites. Composites Part A: Applied Science and Manufacturing 39(10):1632–37. https://doi.org/10.1016/j.compositesa.2008.07.007
Silva, E. R., J. F. J. Coelho, and J. C. Bordado. (2013). Strength Improvement of Mortar Composites Reinforced with Newly Hybrid-Blended Fibres: Influence of Fibres Geometry and Morphology. Construction and Building Materials 40:473–80. https://doi.org/10.1016/j.conbuildmat.2012.11.017
Singh, Maninder, Babita Saini, and H. D. Chalak. (2019). Performance and Composition Analysis of Engineered Cementitious Composite (ECC) – A Review. Journal of Building Engineering 26:100851. https://doi.org/10.1016/j.jobe.2019.100851
le Troedec, Marianne, David Sedan, Claire Peyratout, Jean Pierre Bonnet, Agnès Smith, René Guinebretiere, Vincent Gloaguen, and Pierre Krausz. (2008). Influence of Various Chemical Treatments on the Composition and Structure of Hemp Fibres. Composites Part A: Applied Science and Manufacturing 39(3):514–22. https://doi.org/10.1016/j.compositesa.2007.12.001
Vijay, R., D. Lenin Singaravelu, A. Vinod, M. R. Sanjay, and Suchart Siengchin. (2021). Characterization of Alkali-Treated and Untreated Natural Fibers from the Stem of Parthenium Hysterophorus. Journal of Natural Fibers 18(1):80–90. https://doi.org/10.1080/15440478.2019.1612308
Waters, Christopher L., Rajiv R. Janupala, Richard G. Mallinson, and Lance L. Lobban. (2017). Staged Thermal Fractionation for Segregation of Lignin and Cellulose Pyrolysis Products: An Experimental Study of Residence Time and Temperature Effects. Journal of Analytical and Applied Pyrolysis 126:380–89. https://doi.org/10.1016/j.jaap.2017.05.008
Wattanakornsiri, Amnuay, and Sampan Tongnunui. (2014). Sustainable Green Composites of Thermoplastic Starch and Cellulose Fibers. Songklanakarin Journal of Science and Technology 36:149–61.
Yao, Fei, Qinglin Wu, Yong Lei, Weihong Guo, and Yanjun Xu. (2008). Thermal Decomposition Kinetics of Natural Fibers: Activation Energy with Dynamic Thermogravimetric Analysis. Polymer Degradation and Stability 93:90–98. https://doi.org/10.1016/j.polymdegradstab.2007.10.012
Zhang, Hui, Yu-jie Huang, Mo Lin, and Zhen-jun Yang. (2022). Effects of Fibre Orientation on Tensile Properties of Ultra High Performance Fibre Reinforced Concrete Based on Meso-Scale Monte Carlo Simulations. Composite Structures 287:115331. https://doi.org/10.1016/j.conbuildmat.2022.129750
Zimniewska, Malgorzata, Ryszard Kozlowski, and Michal Rawluk. (2004). Natural vs. Man-Made Fibres-Physiological Viewpoint. Journal of Natural Fibers 1(2):69–81. https://doi.org/10.1300/J395v01n02_05
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Mukesh Thottipalayam Shakthivel, Nirmalkumar Krishnasamy, Ammapalayam Ramasamy Krishnaraja, Ponnusamy Kulanthaivel
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
